Need help?Do you have a question about the Grohe 36252000 and is the answer not in the manual?
General| Product Type | Shower Faucet |
|---|---|
| Model Number | 36252000 |
| Brand | Grohe |
| Finish | Chrome |
| Installation Type | Wall Mounted |
| Number of Handles | 1 |
| Flow Rate | 9.5 L/min |
| Water Connection | 1/2" NPT |
| Warranty | Limited Lifetime |
| Flow Rate (L/min) | 9.5 |
| Mounting | Wall |
| Handle Style | Lever |
| Finish (Chrome) | Yes |
| Shower Head Size | 8 inch |
Technical specifications including flow rate, supply voltage, and power consumption.
Product compliance with EU guidelines and contact information for declarations.
Information on an infrared remote control for settings.
Initial steps before installation, including cover removal and isolating valve operation.
Procedure for flushing pipes thoroughly before and after installation.
Steps for installing the solenoid valve, ensuring correct flow direction.
Instructions for mounting the transformer and connecting its components.
Guide to installing infrared electronics, including alignment and fastening.
Steps for attaching the spout to the escutcheon and connection nipple.
Adjusting water temperature when using a wall-mounting box, using a thermostatic cartridge.
Procedure for adjusting mixed water temperature using a thermostatic cartridge and allen key.
Warning to prevent self-adjustment of temperature by keeping the cap installed.
How the infrared electronics initiate and stop water flow based on hand detection.
Steps to remove and reassemble the transformer for maintenance.
Procedures for removing, cleaning, and reinstalling the solenoid valve and its filter.
Instructions for removing and disconnecting electronic components for servicing.
How to remove and clean the mousseur using a spanner.
Troubleshooting steps for when water is not flowing, covering supply, connections, and valve issues.
Diagnosing and fixing issues causing continuous water flow, such as sensor zone or valve defects.
Addressing unwanted water flow, often related to sensor detection zones or opposing objects.
Solutions for low water flow, including filter checks, isolating valve operation, and supply restrictions.
Reference to accompanying Care Instructions for fitting maintenance.
To Next Page