Grotime Rollover - Page 10

10
STEP 4
ASSEMBLE SINGLE BED BASE
Lay one side rail down then slot all slats into the mortises.
Place the second side rail on top.
Working from one end slot all stats into the mortises.
STEP 3
ASSEMBLE BILATERAIL
TM
BED RAILS
Patent pending
Use the four wood screws to
r.
x2 x11
Assembled base rails
PE
Cot Bed Slats
PF
x4
Wood Screws
HD
Screw Driver
1.
2.
3.
Ensure the slat with the warning labels is correctly positioned
in the middle and the “this way down” lable
is facing down as directed by the
warning lable on the rails.
!
x4 x2
BILATERAIL
TM
Base Brackets
PG
BILATERAIL
TM
Base Rails
PE
x8
mm Bolts
HE
20mm Insert Nut
HP
Align insert
sleeve so the slot
is facing out
Place insert sleeves
into base rail.
(2 at each end of rail)
x8
16