HARDWARE INVENTORY
Carefully remove all packaging material and dispose of it according to grade. Be careful not to
throw away any components by mistake. After use, dispose of the product in an environmentally
friendly manner at your local recycling centre
HARDWARE INVENTORY
PARTS INVENTORY
PRE-INSTALLED HARDWARE
1x
2x
x4
esab toC
lenap dnE
x4
x2
x10
16 mm bolt & cap nut
Allen key
70mm bolt
x8
60mm bolt
x2
Cot side
20mm insert nut
WARNING
BEFORE ASSEMBLING THE COT, ENSURE
YOU HAVE A CLEAR AREA ON CARPET
OR A THICK BLANKET OR RUG. NEVER
ASSEMBLE ON A HARD SURFACE.
! !
Headboard
x1
x1
Bed barrier
To Next Page
Loading...
