Need help?Do you have a question about the GROUND EFX Storm MX60 Series and is the answer not in the manual?
Definitions of Discrimination, Ground Grab, Iron, Pinpoint, and Pull-Tabs for metal detection.
Connects the bottom rod to the coil unit using a bracket.
Connects the Top Rod to the Bottom Rod and then to the Handle Unit.
Wraps the coil cord around rods and connects it to the LCD display.
Instructions for opening and inserting batteries into the compartment.
Shows signal strength, battery life, metal categories, and depth.
Access to volume, sensitivity, and settings menu for detection modes.
Illustrates metal categories and explains how category value aids identification.
Identifies and describes the function of key buttons on the detector.
Steps for Ground Grab and how to use discrimination settings.
How to activate Pin Point and navigate the settings menu.
Detailed explanation and steps for using the Ground Grab feature.
How to use Discrimination and Pinpoint for target identification.
Explains All Metals, Coin, and Jewelry notch modes.
Steps for powering on, selecting settings, and activating Ground Grab.
How to sweep the coil, interpret signals, and use Pinpoint.
Instructions for filling holes after finding an object.
Guidelines for filling holes, respecting property, and leaving no trash.
Warnings about personal injury from buried objects and electrical hazards.
Explains how different tones indicate different metals.
Solutions for the detector not turning on or producing sound.
Troubleshooting tips for unusual or inconsistent sounds.
Details on product warranty coverage, limitations, and customer support.
Statements regarding FCC rules and potential interference.
General| Brand | GROUND EFX |
|---|---|
| Model | Storm MX60 Series |
| Category | Metal Detector |
| Language | English |
To Next Page
