To Next PageTo Next PageWhy is there no sound coming from my Ground Zero GZIA 2.240 Car Amplifier?
If there's no sound, first check if the POW LED is green. If it is, inspect the amplifier's protection fuse(s), the remote wire connection (in RCA input mode), the +12 Volt power supply wire, and the ground wire connection. If the PROTECT LED is red, check for speaker shorts or amplifier overheating.
What to do if my Ground Zero Car Amplifier does not turn on?
If your device isn't powering on, check the amplifier's power wire and connections. Also, verify the remote wire connection to the head unit is properly connected, especially in RCA input mode.
What does it mean if the status LED on my Ground Zero GZIA 2.240 Car Amplifier is red?
A red status LED indicates that the temperature protection circuit is active, or the speaker wires are shorted, or the speaker is damaged. Try decreasing the head unit's volume or wait for cooling. Check the speaker and wires, and insulate if necessary.
How to fix no sound on one channel of my Ground Zero Car Amplifier?
To resolve sound issues on one channel, verify the speaker wiring is undamaged by checking for short circuits or open connections. Also, reverse the left and right RCA inputs to check the audio input signal on each RCA lead.
Why does my Ground Zero GZIA 2.240 Car Amplifier turn off at medium or high volume?
If the device turns off at medium or high volume, it could be due to incorrect speaker load impedance. Check if each speaker's load impedance matches the amplifier's technical specifications.
General| Brand | Ground Zero |
|---|---|
| Model | GZIA 2.240 |
| Category | Car Amplifier |
| Language | English |
