GRUNDFOS ALLDOS DME 8-10

Need help?

Do you have a question about the GRUNDFOS ALLDOS DME 8-10 and is the answer not in the manual?

Summary

English (GB) Installation and operating instructions

Connections

Addressing

Slave Diagnosis Services

Details how the slave informs the master about its current mode and status.

Application-specific diagnostic data

Explains DME pump device-related diagnostics and user-specific data formats.

Watchdog

Describes configuring the pump to stop if communication fails via a watchdog feature.

Pump LED Status and Alarm Handling

Alarm Status

Lists supported alarms, their codes, and causes for DME pumps.

Dosing Control and Commands

Dosing Control Modes

Illustrates data items used in five control modes and max_dosing_flow limit.

PROFIBUS Commands

Explains how to send commands to the DME pump using the Commands Buffer.

PROFIBUS Commands Available

Command List

Lists available PROFIBUS commands with their identifier, data item, and description.

Data Item Overview

Input Data Items

Details input parameters, byte weight, scaling, and data types for DME pumps.