Need help?Do you have a question about the Grundfos MG 71A2 and is the answer not in the manual?
General| Rated Power | 0.25 kW |
|---|---|
| Frequency | 50 Hz |
| Voltage | 230/400 V |
| Frame Size | 71 |
| Efficiency Class | IE1 |
| Protection Degree | IP55 |
Safety warnings and symbols used in installation and operating instructions.
Importance of observing safety instructions for correct installation, operation, and maintenance.
Details of Grundfos MG motors, their applications, and specifications.
How to identify motors via nameplates and the type key system.
Procedures for checking, unpacking, lifting, and storing the motor safely.
Standard designations for motor mounting types according to IEC 60034-7.
Purpose and types of drain holes for moisture escape from stator housing.
Information on bearing types, lubrication, and maintenance procedures.
Specifications for cable entry holes in the terminal box.
Max temperature and altitude limits affecting motor performance and life.
Guidelines for operating motors with frequency converters, including phase insulation.
Required clearance for air circulation and terminal box positioning guidelines.
Precautions for outdoor installation and requirements for motor foundation.
Voltage, frequency, quality requirements, and general connection precautions.
Types of motor protection for single and three-phase motors.
Procedures and safety warnings for connecting the motor electrically.
Procedure for measuring insulation resistance before startup.
Regular inspection and cleaning procedures for the motor.
Procedures for motor bearing replacement, lubrication, and maintenance.
Guide for troubleshooting common motor faults and their causes.
Location of technical specifications like weight and enclosure class.
Instructions for environmentally sound disposal of the product.
Table showing maximum number of starts per hour for different motor types.
Visual representations of motor dimensions and mounting configurations.
To Next Page