Grundfos MP 204 Instructions

English (GB)
3
The hazard statements are structured in the
following way:
Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Intended use
MP 204 is an electronic motor protector, designed for
the protection of an asynchronous motor or a pump.
It must always be installed in a cabinet.
MP 204 is designed for single- and three-phase
motors. In single-phase motors, the start and run
capacitors are also measured. Cos  is measured in
both single- and three-phase systems.
MP 204 must only be installed according to the
technical specifications. See the installation and
operating instructions for the product.
Transporting the product
WARNING
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious
personal injury.
CAUTION
Indicates a hazardous
situation which, if not
avoided, could result in
minor or moderate
personal injury.
SIGNAL WORD
Description of hazard
Consequence of
ignoring the warning.
- Action to avoid the
hazard.
Observe these
instructions for
explosion-proof
products.
A blue or grey circle with
a white graphical symbol
indicates that an action
must be taken.
A red or grey circle with
a diagonal bar, possibly
with a black graphical
symbol, indicates that an
action must not be taken
or must be stopped.
If these instructions are
not observed, it may
result in malfunction or
damage to the
equipment.
Tips and advice that
make the work easier.
CAUTION
Falling objects
Minor or moderate
personal injury
- Wear safety shoes and
helmet.
CAUTION
Sharp element
Minor or moderate
personal injury
- Wear protective gloves
to avoid being cut by
the sharp edges of the
packaging.

Grundfos MP 204 Specifications

General

Brand	Grundfos
Model	MP 204
Category	Protection Device
Language	English