English (GB)
9
MP 204 with GENIbus
Pump operation with MP 204
Technical data
Ambient temperature:
• During operation: -20 - +60 °C. The product must
not be exposed to direct sunlight.
• In stock: -25 - +85 °C.
• During transport: -25 - +85 °C.
Relative humidity: 5-95 %.
Materials: Enclosure class: IP20.
Weight: 1.25 kg.
Electrical data
Supply voltage: 100-480 VAC, 50/60 Hz.
Current consumption: Maximum 5 W.
Fault finding
Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
DANGER
Electric shock
Death or serious
personal injury
- Ensure that the power
and sensor cables are
separated when
installing GENIbus.
- Insulation between the
cabinet and the
product must have a
suitable insulation
resistance or the
cabinet must be
connected to earth.
- All cables taken
through the product
and the current
transformers must be
insulated.
DANGER
Cause of fire
Death or serious
personal injury
- The product must not
be supplied with pump
voltage that exceeds
the rating on the
nameplate.
WARNING
Electric shock
Death or serious
personal injury
- Before dismantling,
make sure that the
power supply has been
switched off and that it
cannot be accidentally
switched on.
To Next Page
Loading...
Need help?
General