Need help?Do you have a question about the Grundfos STC 2.0 C and is the answer not in the manual?
General| Enclosure class | IP42 |
|---|---|
| Insulation class | F |
| Maximum operating pressure | 10 bar |
| Maximum flow | 3.5 m³/h |
| Max Flow Rate | 3.5 m³/h |
| Frequency | 60 Hz |
| Max Liquid Temperature | 110°C |
Crucial guidelines to follow before and during pump installation for safety and performance.
Recommendations for optimal placement of the pump for efficient operation and maintenance.
Steps for safely connecting the pump to a 230V, 50Hz power supply.
Instructions for connecting low-voltage pumps using the supplied transformer.
Resolves issues related to pump startup failures and reduced shower flow.
Specific troubleshooting for negative-head pump models (STN, SSN, STL 2.0 CN).
To Next Page
