Chassis TYGRUNDIG Service
1 - 36
Chassis CNGRUNDIG Service
1 - 36
49
ENGLISH
OPERATION USING EXTERNAL DEVICES
------------------------
High definition HD ready
Connect the corre-
sponding input sources
(e.g. HDTV receiver
or HD-DVD player) to
the HDMI sockets (for
digital HD
TV sources).
This ensures that you
can view digital HDTV programmes, even if they
are copy-protected (HDCP High Bandwidth
Digital Content Protection), without encountering
problems.
Connection options
7
Which television socket(s) you connect your
external devices to depends on the sockets
the external device is equipped with and
the signals which are available.
7
Please note: With many external devices,
the resolution of the video signal must
be adjusted to the input sockets of the
television (see the operating manual of the
external device). You can find out which
values you need to set by referring to the
guidelines in the sections about the various
connection options.
7
Do not connect any other equipment while
the device is switched on. Also switch off
the other equipment before connecting it.
7
Do not plug in the power cord of the device
until you have connected the external
equipment and the antenna.
AV / S-VHS
SERVICE
SATELLITE
13/18V
max. 500mA
ANT-IN
5V
max. 50mA
Optic Out
USB2
HDMI2
AV / S-VHS
SERVICE
ENGLISH
50
Connecting external devices
... with digital audio/video signals
7
Suitable devices: Digital satellite receivers,
Playstation, BluRay player, DVD player/
recorder, set-top box, notebook, PCs.
7
Video signal: Digital video; resolution: stan-
dard 576p; HDTV 720p, 1080i, 1080p.
7
Audio signal: digital audio (stereo, multi-chan-
nel compression, uncompressed).
7
Presets »HDMI 1« or »HDMI2«.
1 Connect the HDMI1 or HDMI2 socket
on t
he television and the corresponding
HDMI socket on the external device using
a standard HDMI cable (digital video and
audio signal).
... using the SCART socket
(CVBS/RGB signal)
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, games
console, video recorder, decoder.
7
Video signal: CVBS/RGB.
7
Audio signal: stereo, analogue.
7
»AV1« preset.
1 Connect the AV1/S-VHS socket on the
tele
vision and the corresponding socket on
the external device using a SCART cable
(video and audio signal).
... with S-Video signal
7
Suitable devices: DVD player/recorder, video
recorder, camera recorder, notebook, PC.
7
Video signal: Y/C.
7
Audio signal: stereo, analogue.
7
»S-VHS« preset.
1 Connect the AV1/S-VHS socket on the
tele
vision and the corresponding socket
on the external device using an EURO/AV
cable (video and audio signal).
OPERATION USING EXTERNAL DEVICES
------------------------
Using a DVD player,
DVD recorder, video recorder
or set-top box
1 Switch on the external device and select the
function you wish to use.
2 Press »
«, use »
V
«, »
Λ
«, »
<
« or »
>
« to
select the preset for the input signal (»AV1«,
»S-VHS«, »HDMI1«, »HDMI2« or »Compo-
nent«) and press »OK« to confirm.
Headphones
Connecting the headphones
1 Plug the headphone jack (3.5 mm ø jack
plug) into the headphone socket on the left
side of the television.
Changing the headphone volume
1 Open the menu with »MENU«.
2 Select the menu item »SOUND SETTINGS«
wit
h »
V
« or »
Λ
« and press »OK« to
confirm.
– The »SOUND SETTINGS« menu ap-
pears.
3 Select the menu item »Audio Output Setup«
wit
h »
V
« or »
Λ
« and press »OK« to
confirm.
– The »Audio Output Setup« menu ap-
pears.
4 Select the line »Audio Out« with »
V
« or
»
Λ
«, select the option »Headphone« with
»
<
« and »
>
« and press »OK« to confirm.
5 Select the line »Headphone« with »
V
« or
»
Λ
«.
6 Set the preferred volume with »
<
« and »
>
«.
7 Press »MENU« to end the setting.
Note:
7
Prolonged listening with headphones at
loud volumes can damage your hearing.
To Next Page
Loading...
