5
ENGLISH
CONNECTION AND PREPARATION
-----------------------------------------------
Connecting the antenna and power cord
1 To receive analogue TV channels, connect
the cable for the rooftop antenna to the an-
tenna socket
»ANT IN« on the television set
Note:
7
Do not plug in the power cord of the device
until you have connected the external equip-
ment and the antenna.
7
Only use the power cord supplied to connect
the television set to a suitable earthed safety
socket.
7
Do not use an adapter plug or extension
lead which does not meet the applicable
safety standards. Do not tamper with the
power cord.
Note:
7
When connecting an indoor antenna you
may have to try it out at different positions
until you get the best reception.
2 Plug the mains cable supplied into the
»AC IN« mains socket of the television.
1
3
2
3 Plug the power cord into a wall socket.
To Next Page
Loading...
Need help?
General