Grundig 40 VLE 7130 BF User Manual (English)

Other manuals for Grundig 40 VLE 7130 BF

Questions and Answers:

A
Amber MontgomeryAug 4, 2025
How to fix a Grundig Flat Panel TV with a snowy screen but no channels?
- J
  jordanmartinAug 4, 2025
  If your Grundig Flat Panel TV screen is showing static ('snow') but no channels, here's what you can do: First, adjust the brightness, contrast, and color settings. Then, initiate a channel scan to tune in available stations. Ensure the antenna cable is securely connected. Try tuning to another channel in case there's an issue with the current station. Finally, try repositioning the TV to avoid possible interference from nearby electronic devices.
J
Joseph GravesAug 8, 2025
What to do if the Grundig Flat Panel TV remote control is not working?
- J
  James MahoneyAug 8, 2025
  If the remote control for your Grundig Flat Panel TV isn't working, try these steps: Ensure there isn't anything blocking the path between the remote and the TV. Check the batteries and replace them if needed. As a last resort, switch off the television at the mains switch for two minutes, then turn it back on.
D
Debbie RomeroAug 12, 2025
Why is my Grundig Flat Panel TV showing ghosting or reflections?
- J
  Jacob SchmidtAug 12, 2025
  If you are experiencing ghosting or reflections on your Grundig Flat Panel TV, consider these solutions: Perform automatic or manual tuning/fine tuning of the channel. Have your antenna cable or system checked. Increase the color intensity. Select the correct color standard in the TV settings, if available. Try tuning to a different channel. Also, ensure the volume isn't set too low.
J
Justin MartinAug 16, 2025
How to fix impaired or absent Teletext on a Grundig Flat Panel TV?
- B
  Brenda RamirezAug 16, 2025
  If Teletext is not working properly on your Grundig Flat Panel TV, try the following: Tune to a different channel, as the issue might be with the current station. Try a different TV channel and perform fine tuning. Check the antenna, as a weak signal might be the cause.
D
David HoffmanAug 21, 2025
What to do if Grundig Flat Panel TV cannot discover DMS device?
- A
  Ariana HillAug 21, 2025
  If your Grundig Flat Panel TV is unable to discover a DMS device, verify that the DMS device is turned on and started. Also, check the network settings on your TV to ensure they are properly configured.
J
Jasmine HobbsAug 25, 2025
Why is the picture quality poor in WLAN mode on my Grundig Flat Panel TV?
- S
  Steven PetersonAug 26, 2025
  If you're experiencing poor picture quality (pixelation) on your Grundig Flat Panel TV while in WLAN mode, it might be due to a weak WiFi signal. Connect the WiFi USB dongle with a USB extension cable to the TV. Position the WiFi USB dongle so that the television does not obstruct the signal.
M
Michael BauerAug 29, 2025
How to fix a dark picture in PC mode on a Grundig Flat Panel TV?
- M
  meredithespinozaAug 29, 2025
  If the picture appears too dark when using PC mode on your Grundig Flat Panel TV, the picture resolution and refresh rate settings on your PC may be incorrect. Adjust these settings on your PC (for example, set the resolution to 1280 x 768 and the refresh rate to 60 Hz).

Grundig 40 VLE 7130 BF Specifications

General

Screen Size	40 inches
Resolution	1920 x 1080 (Full HD)
Display Type	LED
Smart TV	Yes
HDMI Ports	3
USB Ports	2
Wi-Fi	Yes
Audio Output	20 W
Digital TV Standard	DVB-T2/C/S2
HDR Support	No
Refresh Rate	60 Hz
Ethernet	Yes
Bluetooth	No
Energy Class	A+
Weight	9.5 kg