What to do if the Grundig 43 VLE 6725 BP remote control does not work?
If your Grundig TV remote control isn't working, first, ensure you're pointing it directly at the TV. Then, check and replace the remote's batteries if needed. If it still fails, try switching off the television with the main power button for about 2 minutes.
How to fix a Grundig TV with a snowy screen but no station?
If your Grundig TV screen is showing snow but no station, check that the antenna cable is securely connected. If it is, try starting a station search. Also, adjust the brightness, contrast, or color settings. Test with a different station to rule out problems at the station and change the position of the device to eliminate interference from other devices.
What to do if Teletext is missing or faulty on Grundig 43 VLE 6725 BP TV?
If Teletext is missing or faulty on your Grundig TV, test with another channel to exclude problems at the broadcasting station. Also test another channel for fine tuning and ghosts. Ensure that the station signal isn't too weak by checking the antenna system.
What to do if Grundig 43 VLE 6725 BP cannot find DMS device?
If your Grundig TV cannot find the DMS device, ensure that the DMS device is switched on and operating. Also, check the network settings.
Why is the picture dark on my Grundig 43 VLE 6725 BP in PC mode?
If the picture is dark on your Grundig TV in PC mode, the picture resolution and picture frequency on the PC might be set incorrectly. Change the setting on the PC, for example, picture resolution 1280 x 768, picture frequency 60Hz.
To Next Page
General