What to do if the Grundig 55 VLE 9480 SL remote control does not work?
If the Grundig LCD TV remote control isn't working, first ensure there are no obstructions between the remote and the TV and that you're pointing the remote directly at the television. Then, check the batteries and replace them if needed. If it still doesn't work, try switching off the television at the mains switch for two minutes.
Why is my Grundig LCD TV screen snowy but showing no channels?
If your Grundig LCD TV screen shows static but no channels, ensure the antenna cable is properly connected. If it is, try performing a channel scan. Also, check your brightness, contrast, and color settings to make sure they are properly adjusted. The issue might also be at the broadcast station, so try tuning to a different channel. Finally, interference from nearby devices can cause this, so try moving the TV.
What to do if Teletext is not working on Grundig LCD TV?
If teletext is impaired or absent on your Grundig LCD TV, the issue might be with the broadcast station, so try switching to a different channel. If that doesn't work, try fine-tuning or selecting a different TV channel that supports teletext. You should also check your antenna, as a weak signal can cause this issue.
General| Screen Size | 55 inches |
|---|---|
| Display Technology | LCD |
| Backlight Technology | LED |
| Smart TV | Yes |
| Wi-Fi | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Bluetooth | No |
| Ethernet | Yes |
| 3D | No |
| HDR | Yes |
| Audio Output | 20W |
To Next Page