Saving FM radio stations on presets
You can use the remote control to fill 10 presets
with the FM radio stations of your choice. If you
assign the presets again, the previously saved
stations are overwritten.
1 Search for the FM station as described.
2 To save stations, keep pressing the number but-
ton »1...0« until »Preset stored« appears in the
display.
– The stored station with a preset number then
appears in the display.
Note:
7
Button »0« is used for preset 10.
3 To store more stations, repeat steps 1 and 2 as
many times as necessary.
Setting the sound effect “My EQ”
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
V
«
or »
Λ
« and press »OK« to confirm.
3 Select the option »Equaizer« with »
V
« or »
Λ
«
and press »OK« to confirm.
4 Select the option »My EQ profile setup« with
»
V
« or »
Λ
« and press »OK« to confirm.
5 Select the option »Bass« by pressing with »
V
«
or »
Λ
« and press »OK« to confirm.
Select the preferred setting for the bass with
»
V
« or »
Λ
« and press »OK« to confirm.
Note:
7
Repeat the setting for the treble.
6 Switch off the menu with »
Λ
«.
7 Press »MENU« to end the setting.
Setting the contrast of the dis-
play
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
V
«
or »
Λ
« and press »OK« to confirm.
3 Select the option »Contrast« with »
V
« or »
Λ
«
and press »OK« to confirm.
Time/Date
System settings
Brightness
Equaliser >
Contrast
Network >
Time/Date >
4 Set the value with »
Λ
« or »
V
« and press
»OK« to confirm.
Setting the brightness of the
display
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
V
«
or »
Λ
« and press »OK« to confirm.
3 Select the option »Brightness« with »
V
« or
»
Λ
« and press »OK« to confirm.
Time/Date
System settings
Brightness
Equaliser >
Contrast
Network >
Time/Date >
4 Select the option »Normal« or »Standby« with
»
V
« or »
Λ
« and press »OK« to confirm.
5 Set the value with »
Λ
« or »
V
« and press
»OK« to confirm.
To Next Page
Loading...
