43
ENGLISH
MOUNTING THE DEVICE
-----------------------------------------------------------------------------
Tuning and storing FM radio sta-
tions
1 In FM mode, long press the »OK« on product
or »AUTO / « on remote control button to
start the Auto Memory Station (AMS) directly.
– The automatic station scan starts and searches
the FM waveband and store the first 30 radio
stations as presets 1 to 30 (if available).
2 After the scanning process completed, the de-
vice set the first received station for listen.
Note:
7
You can select whether the device will scan
radio stations with Strong Station Only or All
Stations from the menu of FM mode. To do
this;
3 Long press the »INFO/MENU« or short press
»MENU« button to open the menu.
4 Select the option »Scan Setting« by
» « / » « or rotates the »OK« knob, short
press the »OK« to confirm.
– Display: < Strong Station Only > and < All
stations >.
5 Select the desired option (e.g. Strong Station
Only) by » « / » « or rotates the »OK«
knob, short press the »OK« to confirm.
6 To close the menu, short press the »INFO/
MENU« or »MENU« button.
7 And now, long press the »OK« button to start
the Auto Memory Station (AMS) again for
scan the FM waveband and store the first 30
radio stations with a strong signal as presets 1
to 30 (if available).
or
8 Long press the » « / » « or » « / » « but-
ton to search the available previous/next radio
station.
– The automatic station search starts and stops
at the previous/next station with a strong si-
gnal.
or
9 Press briefly the » « / » « or » « / »
« button until you have found the frequency
you want. (The frequency changes in steps of
0.05MHz)
Note:
7
» « button on remote control is same func-
tion as »OK« button on product.
Tuning and storing DAB and FM
radio stations – after a removal
After the automatic station search, all radio sta-
tions will be stored in the station list (program list).
That is reasonable, if you will use the device in an-
other place or search for new DAB radio stations.
1 Long press the » / MODE« button, for 3 se-
conds, to switch the device on.
2 Short press the » / MODE« button to open
the mode menu.
– Display: < Mode Select Interface >.
3 Select the DAB / FM mode icon by
» « / » « or rotates the »OK« knob, short
press the »OK« to confirm.
4 In DAB / FM mode, long press the »OK« or
»AUTO / « button to start the Auto Tuning
System directly.
– The automatic station scan starts for searches
and stores the radio stations.
5 After the scanning process completed, the de-
vice set the first received station of DAB/FM for
listen.
Note:
7
» « button on remote control is same func-
tion as »OK« button on product.
Updating the time – automati-
cally
The device will update the time automatically,
when a time signal is received for a DAB/FM
station.
To Next Page
Loading...
