EasyManua.ls Logo

Grundig DKR 2000 - Radio Operations; General Radio Functions

Grundig DKR 2000
91 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
44
RADIO
--------------------------------------------------------------------------------------------------------------------------------------------------
General functions
Switching On and Off
1 Long press the » / MODE« button, for 3 sec-
ond, to switch the device On/Off (standby).
Adjusting the volume
1 Rotates the »OK« knob to »-« / »+« on product
or press »VOL-« / »VOL+« on remote control
to set the volume level.
Display: < The current volume > (shown for 2
seconds).
Mute the volume
1 Short press the » « button to mute the vol-
ume.
2 Short press the » « button again to resume
volume from mute mode.
DAB mode
Note:
7
» « button on remote control is same func-
tion as »OK« button on product.
Selecting DAB mode
1 To select the DAB mode, short press the
» / MODE« button to open the mode menu.
Display: < Mode Select Interface >.
2 Then press » « / » « or rotates the »OK« knob
to select DAB icon and short press »OK« but-
ton to enter mode.
Display: < DAB interface >.
Selecting DAB radio station
1 To select the desired station from the station list,
short press the » « / » « or » « / » « but-
ton to open the station list.
Display: < Station List >.
2 Then press » « / » « or rotates the »OK«
knob to select the desired station and short
press the »OK« to confirm.
3 The device switch to the desired station at same
time.
Displaying DAB station information
1 To display information on the current DAB sta-
tion, short press the »INFO/MENU« button
on product or »INFO« button on remote con-
trol repeatedly.
Display: The following display appears in
succession: Information from the provider
(e.g. the title of the song, the e-mail address),
the signal strength, the genre, the ensemble
(e.g. BR Bayern), the current channel and fre-
quency, the bit rate, the broadcasting format,
the current time and date.
Setting Dynamic Range Control (DRC)
for DAB stations
When you activate Dynamic Range Control, you
can hear lower sounds better in a loud environ-
ment.
1 In DAB mode, long press »INFO/MENU« or
short press »MENU« button to open the DAB
menu.
2 Rotates the »OK« knob or press
» « / » « to select the option DRC and short
press the »OK« to confirm.
Display: < High, Low and Off >.
3 Select the desired option (e.g. High) by rotates
the »OK« knob or press » « / » « and short
press the »OK« to confirm.
4 Option select closed and back to menu, you
can see High (yellow highlighted) show behind
the DRC option.
Note:
7
The DAB station must support DRC.

Related product manuals