45
ENGLISH
RADIO
--------------------------------------------------------------------------------------------------------------------------------------------------
FM mode
Note:
7
» « button on remote control is same func-
tion as »OK« button on product.
Selecting FM mode
1 To select the FM mode, short press the
» / MODE« button to open the mode menu.
– Display: < Mode Select Interface >.
2 Press » « / » « or rotates the »OK« knob to
select the FM mode icon and short press »OK«
button to confirm.
– Display: < FM radio interface >.
Selecting stored stations
1 Short press the »PROG/MEM« button to
open the preset recall menu.
– Display: < Preset Recall > and < number: Fre-
quency (list) >.
2 Select the station’s frequency you want by ro-
tates the »OK« knob or press » « / » « and
short press the »OK« to confirm.
3 The device switch to the selected station at
same time.
Displaying RDS station information
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
Note:
7
It may take some time before all RDS infor-
mation is available. GRUNDIG has no influ-
ence on the correctness of such information.
1 Short press the »INFO/MENU« or »INFO«
button repeatedly to display information on the
current FM station.
– Display: The following display appears in
succession: The name of the radio station,
radio text (if offered), station type (PTY), the
signal strength, the frequency, mono/stereo,
the current time and date.
To Next Page
Loading...
