ENGLISH
32
AUX/OPTICAL/COAXIAL/HDMI OPERATION
--
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the
(SOURCE) button repeatedly on
the unit or the AUX, OPT/COA, HDMI
1/2, HDMI ARC buttons on the remote
control to select the desired mode.
3 Operate your audio device directly for play-
back features.
4 Press the VOL +/– button to adjust the vol-
ume to your desired level.
Tip:
▪
The unit may not be able to decode all digi-
tal audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is
set to PCM or Dolby Digital (Refer to the
user manual of the input source device for its
audio setting details) with HDMI 1 / HDMI
2 / HDMI ARC / optical / coaxial input.
▪
In HDMI 1 / HDMI 2 mode, when the
DOLBY ATMOS audio format is entered, the
Soundbar display shows DOLBY ATMOS.
When the DOLBY DIGITAL audio format is entered,
the Soundbar display shows DOLBY AUDIO.
When the PCM audio format is entered, the
Soundbar display shows PCM AUDIO.
When entering non-PCM or DOLBY DIGITAL
audio formats, if there’s no sound output from
the unit and the display show NONSUPPORT
FORMAT.
To Next Page
Loading...
