EasyManua.ls Logo

Grundig DTR 6000 X - Managing Alarms; Sleep Timer Functions

Grundig DTR 6000 X
67 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
ENGLISH
ALARM MODE
---------------------------------------------------------------------------------------------------------------------
Interrupting the alarm
1 Press any key on the device or » « on remote
control while the alarm is sounding.
– Display: 5 minutes
– The alarm (signal tone or radio) stops.
Note:
7
The alarm will sound again depending on
how often a button has been pressed (1 time
= after 5 minutes, 2 times = 10 minutes, 3
times = 15 minutes, 4 times = 30 minutes.
Cancelling alarm stand-by
1 To cancel the alarm, press and hold
»8/MODE« on the device or press »8« on the
remote control.
Activating and deactivating the
alarm
1 Press »8« to switch off the device.
2 Press and hold »ALARM/BACK« to deacti-
vate or reactivate the alarm stand-by.
Note:
7
1 time = alarm1 On, 2 times = alarm 1 On
and alarm 2 On, 3 times = alarm 1 Off and
alarm 2 On, 4 times = alarm 1 Off and
alarm 2 Off.
Sleep Timer
The device has a sleep timer which switches off in
radio mode at a preset time. It is possible to adjust
the sleep time between 15 and 60 minutes in 15
minute increments.
Select the switch-off time for the sleep
timer
1 Press »8« to switch on the device.
2 Press and hold »MENU/INFO« on the dee-
vice, select Main Menu → Sleep
3 Alternatively, press » « on remote control to
adjust the sleep time.
4 Set the switch-off time with »r e« (in 15 minutes
increments) and confirm by pressing »OK«.
– Display: » « with the remaning time.
Notes:
7
To check the remaining switch-off time press
briefly »Sleep«.
7
You can set the switch-off time also by press-
ing » « (in 15 minutes increments) until the
display shows »Sleep OFF« .
Switch off the sleep timer
1 To switch off the sleep timer earlier, press sleep
logo and adjust to »Sleep Timer OFF«
and confirm by press »OK«.

Related product manuals