ENGLISH
14
OVERVIEW
--------------------------------------------------------------------------------------------------------------
Buttons of the remote
control
Turning on the television and
switching it to standby mode
1 Press 8/I to turn on the television in the
stand-by mode.
2 Press
8/I to switch the television to the
stand-by mode.
Adjusting the volume
1 Press V/P.
2 Press + or – to select »Volume« and press
V/P to confirm.
3 Use + to increase volume.
4 Use – to decrease volume.
Changing the channel
1 Press V/P.
2 Press + or – to select »Channels« and press
V/P to confirm.
3 Press + to go to the channel.
4 Use – to go to the previous channel.
7
Service: Service only.
7
LAN: Network connection.
7
Optic Out: optical audio output.
7
USB(HDD): For external data media.
7
HDMI3 (ARC): Input for digital audio and
image data.
7
HDMI2: Input for digital audio and image
data.
7
SATELLITE: Input for satellite antenna signal.
Suitable for single-cable SCR system.
7
ANT IN: For antenna cable (terrestrial
antenna or cable connection).
7
IR OUT: IR Blaster output.
7
USB 1: For data media and keyboard.
7
HDMI1: Input for digital audio and image
data.
7
CI: For CA modules for receiving scrambled
channels.
To Next Page
Loading...
Need help?
General