EasyManuals Logo

Grundig GNLP4541WC1 User Manual

Grundig GNLP4541WC1
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12/
EN
Drain pipe must be connected to the
sewage system and it should not be
connected to any surface water.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product rocks when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
Steam may escape if the door of the
dishwasher is not adjusted properly.
Hot steam may cause serious burns
and injuries and damage your furniture.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. See the installation manual
supplied with your machine for detailed
information.
min
300*
min
120*
max 1000 *
min 500 *
* mm
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Our company
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with
the local regulations.
Connection must comply with national
regulations.
Power cable plug must be easily
accessible after installation.
Plug in the product to a grounded
socket which is protected by a fuse of
10 Amperes.
The specified voltage must be equal to
your mains voltage.
Do not make connections via extension
cables or multi-plugs.
Damaged power cables must be
replaced by the authorised service
agent.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundig GNLP4541WC1 and is the answer not in the manual?

Grundig GNLP4541WC1 Specifications

General IconGeneral
BrandGrundig
ModelGNLP4541WC1
CategoryDishwasher
LanguageEnglish

Related product manuals