Need help?Do you have a question about the Grundig GV 500 SV and is the answer not in the manual?
General| Video Recording System | VHS |
|---|---|
| Number of Heads | 4 |
| Remote Control | Yes |
| TV Tuner | Yes |
| Type | VCR |
| Tuner | PAL/SECAM |
| Playback Speeds | SP, LP |
| Inputs | Antenna |
| Outputs | RF, SCART |
| Power Supply | AC 220V |
Connects the aerial cable to the recorder's socket.
Connects recorder to TV via AV or aerial cable.
Connects the recorder to the power supply.
Puts recorder into low-power standby.
Guide for inserting batteries into the remote.
Overview of remote buttons and functions.
Explains remote button levels.
Details timer programming buttons.
Selects VCR address for remote control.
Groups entries, drive mechanism, and cover buttons.
Explains the on-screen user guide interaction.
How to display the info table using the 'i' button.
Explains button symbols and dialogue line meanings.
Adjusts TV to receive recorder's signal.
Manages the recorder's transmission signal.
Sets the internal clock and date.
Receives and stores TV broadcast channels.
Transfers TV tuning data via Megalogic.
Uses ATS to find and store TV channels.
Troubleshooting steps for picture interference.
Reorders stations based on TV's sequence.
Manually reorders TV station list.
Manually inputs TV station information.
Removes a stored TV station entry.
Procedures for inserting and removing cassettes.
Automatic and manual cassette time recognition.
Prevents accidental overwriting of recordings.
Information on on-screen display features.
Basic steps for playing cassettes.
How Megalogic impacts playback.
Automatic and manual adjustments for playback quality.
Improves quality for tapes from other recorders and freeze-frame.
System for finding and removing recorded segments.
Basic steps for starting and managing recording.
How Megalogic impacts recording.
Sets or modifies the recording end time.
Joins recordings seamlessly.
Overview of timer recording capabilities.
How to record multiple programs daily.
Records all evening programs using one timer slot.
Uses ShowView codes for timer programming.
Extra options for ShowView programming.
Explains status and error messages.
Checks, alters, and erases timer recordings.
Interrupts and reactivates record stand-by.
Manual timer programming using on-screen guide.
Connects external units for copying.
Steps before copying from external sources.
Procedures for copying recordings.
Connects the recorder to a PAY-TV decoder.
Assigns channels for decoder programs.
Describes recorder states with a decoder.
Uses external units to control recording.
Enables continuous playback of recordings.
Locks all recorder functions.
Adjusts duration of on-screen displays.
Controls multiple Grundig VCRs.
Sets the VCR address for the GV 500.
Controls two recorders with one remote.
Changes the language of the user guide.
Controls a Grundig TV set.
Troubleshooting guide for common issues.
Specifications and technical details of the recorder.
Lists and explains code numbers for functions.
To Next Page