Need help?Do you have a question about the Grundig PS-4200 and is the answer not in the manual?
Replace components with identical specifications to meet safety requirements per VDE or IEC standards.
Adjust the tonearm's needle drop point using screw A for 33 and 45 rpm speeds.
Set the turntable speed to 33 or 45 rpm using potentiometers R 3009 and R 3006.
Replace components with identical specifications to meet safety requirements per VDE or IEC standards.
Adjust the tonearm's needle drop point using screw A for 33 and 45 rpm speeds.
Set the turntable speed to 33 or 45 rpm using potentiometers R 3009 and R 3006.
General| Speeds | 33 1/3, 45 RPM |
|---|---|
| Platter | 300mm aluminum |
| Tonearm | Static balanced S-shaped tonearm |
| Dimensions | 420 x 360 x 140mm |
| Weight | 6.5kg |
| Power Supply | 220V |
To Next Page