What to do if there is noise interference on Grundig Speakers?
If you're experiencing noise interference with your Grundig Speakers, it might be due to interference from another device. Try selecting a different transmission channel on both the wireless module and the outdoor loudspeaker to resolve this issue.
How to fix Grundig PSW 5000 Speakers when the outdoor loudspeaker does not work?
If your Grundig Speakers aren't working, the issue might be that the transmission channels are not matched. To fix this, set the switches on both the transmitter and the outdoor loudspeaker to use the same transmission channel.
What to do if Grundig PSW 5000 malfunctions occur?
If your Grundig Speakers are malfunctioning, it could be due to a static electrical charge. Reset the player by unplugging the mains adapter or removing the batteries. Then, restore the power supply after a brief pause.
General| Configuration | 2.1 |
|---|---|
| Total Power Output | 50W RMS |
| Subwoofer Power | 30W RMS |
| Frequency Response | 40Hz - 20kHz |
| Input Sensitivity | 500mV |
| Input Impedance | 10kΩ |
| Bass Control | Yes |
| Treble Control | Yes |
| Volume Control | Yes |
| Type | Speaker System |
| Weight (Satellite) | 0.5 kg per satellite |
| Satellite Speakers Power | 2 x 10W RMS |
Key safety advice and precautions for optimal and safe use of the device.
Details the operating controls, channel selection, and connections for the wireless module.
Details the operating controls located on the front of the loudspeaker for power, volume, and lighting.
Details the operating controls and connection sockets found on the bottom of the loudspeaker.
Step-by-step guide on connecting the wireless module to a hi-fi system.
Instructions for battery and mains operation setup of the loudspeaker.
Details on system functionality, wireless range, and potential interference issues.
Procedure for powering on the hi-fi system, wireless module, and loudspeaker.
Guide for connecting external audio devices like digital music players.
Instructions on activating and deactivating the bass boost feature.
How to turn the loudspeaker's lighting on and off.
Procedure for powering down the loudspeaker, wireless module, and hi-fi system.
Identifies faults, possible causes, and remedies for common problems.
Provides specifications for the wireless module and outdoor loudspeaker.
To Next Page
