Grundig STR 310 - Page 12

This adjustment can be omitted if you have connected
the receiver via a EURO-AV (Scart) connecting lead to the
television or video recorder.
Select a free channel position on your TV and tune to UHF
channel 37 (the receiver's output channel). For this, refer
to the instruction book of your TV.
If this channel is already being used by a TV channel or a
different unit (say, your video recorder), you will see
interference if the other equipment is operating. Retune
your TV to an unused part of its range close by (channel
number 32 to 42) and then with a small screwdriver
gently and slowly turn the small adjuster on the receiver
rear panel, next to the TV/VCR socket, until your televi-
sion displays a clear picture. Fine tune your TV for the
best picture and sound.
You will also have to tune in your VCR to the same UHF
channel in the same way in order to record satellite TV
programmes.
@ 11