ENGLISH 21
Washing or replacing the filter
The vacuum suction head
U
on the appliance is assembled with a washable
permanent filter to avoid trouble in case the container lid
C
is spattered with
food, as this can block the vacuum passage and cause trouble.
Press
Filter
Vacuum
seal
Suction
head cover
Press the latches of suction
head cover
U
at both sides
to remove it downward.
Take out the filter
S
from
the vacuum seal
T
to
wash or rinse it, or replace
a new one.
Place and secure the
suction head cover
U
back before use.
The container lid
C
is also assembled with a washable permanent filter.
Open
Open
Lock
Lock
L
o
c
k
O
p
e
n
Turn over the lid
C
and open the backflow
prevention cap by turning
it anti-clockwise to remove
it from the lid
C
.
Take out the backflow
prevention cap to wash or
rinse then to dry it. Make
sure there is no water or
foods blocked venting
holes.
Place and secure the
backflow prevention
cap back by turning it
clockwise before use.
INFORMATION ______________________
To Next Page
