Need help?Do you have a question about the Grundig WKC 4870 RDS A and is the answer not in the manual?
General| Model | WKC 4870 RDS A |
|---|---|
| RDS | Yes |
| CD Player | Yes |
| USB Port | Yes |
| Bluetooth | No |
| Display | LCD |
| MP3 Playback | Yes |
| Equalizer | Yes |
| Auxiliary Input | Yes |
| Type | Car Stereo |
| Tuner | AM/FM |
Multifunction control for power, volume, and balance.
FADER/SPEED, BASS, TREBLE for sound adjustment.
LOUD, Tape Type/CD, DOLBY NR, RDS, Standby buttons for enhanced operation.
Lock for removable operating section and cassette compartment.
TP button, manual tuning, and station search functions.
Shows station data, frequency, and operating modes.
AM and FM buttons for selecting radio frequency bands.
Storing and recalling radio presets.
Key information regarding coding and RDS.
Theft protection feature activation.
System for receiving additional broadcast information.
Switching on/off, volume, and tone adjustments.
Relative volumes and 1-hour switching.
Setup and adjustment of speed-dependent volume.
Receiving broadcasts on different frequency bands.
Receiving additional broadcast information.
AF, RDS switching, programme selection, RDS traffic news.
Automatic storage of RDS programmes.
Storing and selecting stations in memory.
Notes, range selection, and band buttons.
Sensitivity adjustment and frequency comparison.
Fine-tuning radio frequencies.
Accessing previously saved radio presets.
Selecting tape type and Dolby NR.
Instructions for playing audio from a cassette.
Fast wind and automatic track search.
RDS traffic flashes and standby mode.
Procedure for removing the cassette.
RDS traffic flashes and standby mode during CD playback.
Details about the unit's identification card.
Enabling the theft protection feature.
Verifying if the coding feature is active.
Restoring operation after power loss.
Disabling the theft protection feature.
Detaching and reattaching the front panel.
Security indicator label.
General care and upkeep instructions.
Guidance for fitting the unit.
SCV range adjustment using an inductive sensor.
SCV range adjustment using a Hall effect sensor.
Antenna and external CD player ports.
Speaker terminals and line output.
Fuse compartment and SCV port.
+12V terminals and control illumination.
Chassis ground and plastic holder.
To Next Page
