Need help?Do you have a question about the Gryphon Diablo 300 and is the answer not in the manual?
Discusses the state-of-the-art equipment and minds behind Gryphon's standards.
Details specific placement requirements to prevent overheating and ensure safety.
Explains the location and function of the main standby switch.
Discusses the state-of-the-art equipment and minds behind Gryphon's standards.
Details specific placement requirements to prevent overheating and ensure safety.
Explains the location and function of the main standby switch.
General| Type | Integrated Amplifier |
|---|---|
| Power Output | 300W per channel into 8Ω |
| Frequency Response | 0.1Hz - 350kHz |
| Total Harmonic Distortion | <0.05% (20Hz - 20kHz) |
| Inputs | 2x XLR |
| Outputs | 1 x unbalanced (RCA) |
| Dimensions | 48 cm x 23 cm x 46 cm |
| Signal-to-Noise Ratio | >100 dB |
To Next Page