Need help?Do you have a question about the Gryphon Diablo 333 and is the answer not in the manual?
Successor to Diablo 300 with improved power and trickle-down tech.
Avoid heat, ensure ventilation, and allow clearance around the unit.
Unit is made for specific country voltage; correct polarity is crucial.
Refer to the separate setup document or website for detailed instructions.
Warning about hazardous live AC power; directs to safety instructions on page 36.
Navigate menu items or exit; Phono Stage menu requires module.
Configure initial and maximum volume levels.
Connect balanced sources using XLR connectors.
Connect single-ended sources via RCA; Input 4 is for tape.
Highlights dual mono, zero feedback, advanced circuitry, and component quality.
Lists output power, impedance, bandwidth, supply capacity, and gain.
Identifies errors related to temperature and DC/HF faults.
Explains how the unit responds to errors and how to recover.
High-performance MM/MC phono stage with balanced dual-mono design.
Warning about hazardous AC power; directs to safety instructions.
Instructions for setting MC cartridge load impedance via rear panel switches.
Details topology, components, and design principles.
Lists gain, impedance, S/N ratio, and input voltage limits.
Exceeding maximum input voltage can damage the PS3 module.
Details warranty coverage, duration, and non-transferability.
Procedures for claims and conditions that invalidate the warranty.
Essential guidelines for safe operation, ventilation, and power.
Warnings regarding electrical shock, liquids, and open flames.
Critical warnings about battery explosion and chemical burn hazards.
Successor to Diablo 300 with improved power and trickle-down tech.
Avoid heat, ensure ventilation, and allow clearance around the unit.
Unit is made for specific country voltage; correct polarity is crucial.
Refer to the separate setup document or website for detailed instructions.
Warning about hazardous live AC power; directs to safety instructions on page 36.
Navigate menu items or exit; Phono Stage menu requires module.
Configure initial and maximum volume levels.
Connect balanced sources using XLR connectors.
Connect single-ended sources via RCA; Input 4 is for tape.
Highlights dual mono, zero feedback, advanced circuitry, and component quality.
Lists output power, impedance, bandwidth, supply capacity, and gain.
Identifies errors related to temperature and DC/HF faults.
Explains how the unit responds to errors and how to recover.
High-performance MM/MC phono stage with balanced dual-mono design.
Warning about hazardous AC power; directs to safety instructions.
Instructions for setting MC cartridge load impedance via rear panel switches.
Details topology, components, and design principles.
Lists gain, impedance, S/N ratio, and input voltage limits.
Exceeding maximum input voltage can damage the PS3 module.
Details warranty coverage, duration, and non-transferability.
Procedures for claims and conditions that invalidate the warranty.
Essential guidelines for safe operation, ventilation, and power.
Warnings regarding electrical shock, liquids, and open flames.
Critical warnings about battery explosion and chemical burn hazards.
To Next Page
General
