Assembly and use of optional face
shield
1. Leave grinder unplugged until ready to use.
2. Place Face Shield Extensions into slots on the Wing
Bracket with the open end of the C-shaped bracket
facing forward.
3. Snap Face Shield into top of Extensions.
4. Insert rubber wings into slots on either side of Wing
Bracket.
5. Press assembly with wings and face shield into slots on
platform.
For best results, use Gryphon
Grinding Bits.
Gryphon offers a line of quality grinding
bits.
See your dealer for genuine Gryphon Grinding Bits.
Visit www.gryphoncorp.com for the latest Gryphon products.
To Previous Page
Loading...