GS Racing Storm - Required Equipment for Operation; Tools Required for Building and Maintenance

Required Equipment for Operation
1. Tools required for building and maintenance:
• Hobby knife
• Needle nose pliers
•
Precision ruler or caliper
• Phillips
screwdriver (#0, #1, #2)
•
Hobby scissors
•
Wire cutters
•
Thread locking compound
•
CA glue
•
Rubber cement
• Precision Ruler or Caliper
1'1'1'1'1'
I
e Hobby Knife
• Wire Cutters
e Needle Nose Pliers
0
e Thread Locking Compound
e Phillips Screwdriver (#0, #1 , #2)
e CA Glue & Rubber Cement
WARNING!
Tools Included:
• Hex Wrench
1. 5mm
2mm
J
e Cross Wrench
Do not use a power screwdriver to install screws into nylon, plastic or composite materials.
The fast rotation speed can heat up the screws being installed. They can then break the
molded parts or strip the threads during installation.
3