To Next PageTo Next Page
Need help?Do you have a question about the GSM G202 and is the answer not in the manual?
General| Brand | GSM |
|---|---|
| Model | G202 |
| Category | Gate Opener |
| Language | English |
Prohibits use of GSM equipment in dangerous situations.
Warns about potential interference from other wireless equipment.
Instructs not to use near fuels or chemicals.
Advises powering off the device in blasting areas.
Recommends installing in suitable locations, avoiding signal shielding.
Diagram and labels for the physical components of the Gate Controller G202.
Explains the function of indicators like ANT, Signal, Relay, and Reset.
Command format to change the default password for the GSM Gate Opener.
Command format to add or manage authorized phone numbers for gate access.
Command to check which authorized number is stored at a specific serial number.
Command to remove an authorized phone number from the device's list.
Command to allow any phone number to access the device, disabling authorized-only access.
Command to revert to default setting, allowing only authorized numbers to access.
Command to set the duration the relay remains closed after activation.
Command to check the current GSM signal strength for optimal operation.
Command to enable/disable SMS notifications upon relay activation.
SMS commands to manually turn the relay ON or OFF.
Instructions for wiring the device to an electronic lock or similar equipment.
Guidance on physically mounting the main unit of the GSM Gate Opener.
