GSS GSS.mux SMCIP 401 User Manual

English
CLASS
KLASSE
SMCIP 401
DVB-S/S2 DVB-S
GSS
Grundig SAT Systems GmbH
Beuthener Strasse 43
D-90471 Nuremberg
Phone: +49 (0) 911 / 703 8877
Fax: +49 (0) 911 / 703 9210
E-mail: info@gss.de
Internet: http://www.gss.de/en

GSS GSS.mux SMCIP 401 Specifications

General

Brand	GSS
Model	GSS.mux SMCIP 401
Category	Media Converter
Language	English

Summary

Safety Regulations and Notes

Assembly

Installing the Device

Instructions on how to physically mount and position the device.

Device Overview

Connecting the Device

Details on how to connect the device to power and signal sources.

Retrofitting a CA Module

Guide on how to install a Conditional Access module into the device.

Software Update

Instructions on how to update the device's operating software.

Programming

Frequency Setting Notes

Guidance on setting the output frequency for a new transponder.

Level Setting Notes

Instructions for adjusting the output signal level correctly.

Programming Procedure

Step-by-step guide for programming the device's settings.

Programming the Cassette

Details on how to program settings related to a cassette or configuration.

Output Parameter and Level

Adjusting output level and accessing modulator configuration submenus.

Modulator Frequency (SAT IF)

Setting the output frequency for the modulator.

Output Symbol Rate, Spectral Position, Code Rate (FEC)

Configuring symbol rate, spectral position, and FEC for the output signal.

Input Parameter Configuration

Selecting the tuner and configuring input settings.

LNB Oscillator Frequency and Control Voltage

DiSEqC Commands

Input Symbol Rate

Input Frequency

Operation with a CA Module

Station Selection

Output Data Rate

CA Module Configuration

Factory Reset