GT MK2 - Installation; Proper Handling and Cautions for Slinging Methods

Standard lift m 205 2.5 2.5 2.5 2.5
Load chain falls 1 1 1 1 1
Load chain mm ø 4 X 12 ø 5 X 15 ø 6 X 18 ø 7 X 21 ø 8 X 24
Effort force N 235 240 250 265 335
A mm 121 147 172 196 210
B mm 114 132 151 173 175
Dimensions C mm 21 23 27 33 35
D mm 31 35 40 45 50
Hmin mm 280 345 376 442 470
Net Weight KG 6.2 11 12.5 17.8 19.5
Model CH300A CH300B CH500 CH750 CH1000 CH1500 CH2000
Capacity KG 3000 3000 5000 7500 10000 20000 20000
Standard lift m 3 3 3 3 3 3 3
Load chain falls 1 2 2 3 4 6 8
Load chain mm ø 10 X 30 ø 7 X 21 ø 10 X 30 ø 10 X 30 ø 10 X 30 ø 10 X 30 ø 10 X 30
Effort force N 372 290 365 370 385 390 390
A mm 255 230 280 463 463 420 630
B mm 205 176 189 189 189 208 220
Dimensions C mm 39 39 45 54 54 82 82
D mm 55 55 65 75 75 106 106
Hmin mm 548 565 688 690 700 950 1100
Net Weight KG 35 29 41.3 62 78.5 135 190
4. Installation and Operation
Installation
The support structure (such as buildings) on which the hoist body works is to bear 4 times of the rated load capacity of the unit .
4.1 Proper Handling and cautions for slinging methods
1. How to apply an incorrect load to the hook i.e.Incorrect slinging (Avoid the examples below):1.