To Next PageTo Next Page
Need help?Do you have a question about the GTO/PRO EXIT WAND and is the answer not in the manual?
General| Brand | GTO/PRO |
|---|---|
| Model | EXIT WAND |
| Category | Door Opening System |
| Language | English |
Key terms and definitions for understanding the EXIT WAND operation and installation.
Explains the magnetic field principle behind the EXIT WAND's operation.
Details how the range adjustment potentiometer controls sensitivity.
Specifies optimal location and distance requirements for the WAND sensor.
Summarizes the main steps of installing the WAND and connecting it.
Provides recommendations for locating the WAND to avoid interference.
Step-by-step guide to choosing the best spot for the WAND sensor.
Instructions for securing the WAND cable at the control box entry point.
Specific wiring instructions for connecting the WAND to SW3000/SW4000 models.
Specific wiring instructions for connecting the WAND to SW1000/SL1000 models.
Details on wiring the range adjustment board to the system.
Steps for connecting the WAND system to the gate operator's power source.
Instructions for powering the WAND and initial self-test period.
Guide on tuning the sensitivity range for optimal performance.
Important safety warnings regarding the WAND's operation and installation.
Steps for connecting the WAND system to AC power.
Instructions for initial operation and range tuning for AC systems.
Safety notes specific to AC powered installations.
Wiring details for the range adjustment board on AC systems.
Connecting the WAND to the AC power supply.
Initial startup and range tuning for AC installations.
Key safety reminders for AC powered systems.
General wiring guidelines for non-GTO/PRO gate operators.
Key technical data and operational parameters of the EXIT WAND.
Steps to diagnose and resolve common issues with the EXIT WAND.
