A. Solar Panel
B. Lag Screws (4)
C. Pipe Clamp (4)
D. Curved Pipe
E.
1
/4" Nuts (4)
F.
1
/4" x
1
/2" Bolt (4)
G. Wire Nuts
H. Compass
Tools Required :
• Slotted (at blade) Screwdriver
•
7
/16" open end wrench
Parts Included:
PRORB907 Rev. 11/5/07
©2007 GTO, Inc.
All dual gate installations require a minimum of 10 Watts of solar charging power.
Solar Powered
Battery Charger
Installation Manual
10 Watt
For more information on GTO/PRO’s full line of automatic gate openers and access controls visit our website at www.gtopro.com
Printed in China for GTO, Inc.
FM123
Compatible with all GTO/PRO and Mighty Mule DC Powered Slide and Swing Gate Operators.
To Next Page
Need help?
General