GTO®, GTO/PRO®, Bulldog®, are registered trademarks of GTO, Inc. Professional Access Systems™ , is a trademark of GTO, Inc. and are the exclusive property of GTO, Inc. (“GTO”).
All rights are reserved by GTO, and these marks may not be used, in any for without the prior, written permission of GTO. Copyright 2007 rev-02-2007
2
0
Y
E
A
R
S
o
f
i
n
n
o
v
a
t
i
o
n
PROFESSIONAL
ACCESS CONTROLS
1-800-543-GATE (4283) • www.gtopro.com
STANDARD FEATURES
DRIVEWAY WAND SENSOR
AVAILABLE FROM:
• Electromagneticsensordetectsvehicles-in-motion.
• Relaylatchtimeof2seconds.
• Compatiblewithallautomaticgateoperators,or
othersystemsrequiringadrycontactinputdevice.
• Potentiometerboardadjustssensitivityfrom3to12
footradiustoaccommodatemanyapplications
andsituations.
• Idealforsolarapplication,1.5mAcurrentconsumption.
• Wideinputvoltagerange(8-32vACor8-26vDC).
• Designedtorejectlinenoiseof50Hzor60Hz;
improvesdetectioncapabilitynearpowerlinesand
avoidscrosstalkfrequencyissues.
• Dimensions:1.75”(44.5mm)diameterx16.75”
(425.4mm)long.
• Maynotbeusedasasafetydevice.
• Nodriveoverloadstogetdamagedorfail,common
withloopdetectorsystems.
Automatically activates gate operators “Hands-Free” when
a vehicle approaches. Designed for residential, agricultural,
and commercial applications.
Easy to install. Avoid the headaches associated with installing
exit and entry loop detector systems, installs in 1/3 the time.
Driveway Wand Sensor
Direct burial wire lengths:
(FM139)50ft.
(15.3 m)
(FM140)100ft.
(30.5 m)
(FM141)150ft.
(45.7 m)
(FM141-250)250ft.
(76.2 m)
(FM141-500)500ft.
(152.4 m)
(FM141-1000)1000ft.
(304.8 m)
Driveway Wand Sensor
Control Board
Need help?
General
