GTW MACH 01-176 User Manual

1
2
Remove hardware from struts and take off
canopy. Retain hardware. You will need it
later.
Remove hardware from gutters. Retain
hardware from gutters. You will need it later.
Remove gutters by sliding them upward.
WILL FIT YAMAHA DRIVE 2 (2017-UP)
installation instructions
gtw mach rear flip seat
mach 1 steel : 01-176, 01-177, 01-178
mach 2
aluminum : 01-179, 01-180, 01-181
included:
Pack 1
6 - 10x25mm hex bolt
12 - 10mm at washer
6 - 10mm lock nut
2 - 8mm lock nut
2 - 10x90mm hex bolt
4 - 10mm at washer
2 - 10mm lock nut
2 - 6x35mm hex bolts
2- 6mm at washers
2 - 6mm fender washers
2 - 6mm lock nuts
Pack 2
6 - 10x70mm hex bolt
2 - 10mm countersunk #3 bolts
14 - 10mm at washers
6 - 10mm lock nuts
2 - rubber spacers
2 - 10mm acorn nuts
Pack 3
4 - 6x25mm hex bolt
4 - 6mm lock washers
4 - 6mm at washers
Pack 4
2 - 10x45mm hex bolt
4 - 10mm at washers
2 - 10mm lock nuts
Pack 5
8 - 8x35mm countersunk bolts
HARDWARE
Main Brackets
Bagwell Brackets

GTW MACH 01-176 Specifications

General

Brand	GTW MACH
Model	01-176
Category	Automobile Accessories
Language	English

Summary

GTW Mach Rear Flip Seat Installation

Seat Assembly Steps

Main Brackets and Rear Struts Attachment

Attach new main brackets to the cart and then attach rear struts to these brackets using retained hardware.

Frame and Bracket Installation

Bagwell Bracket Installation

Install the bagwell bracket in the bagwell, measuring and drilling as guided.

Frame Drilling and Bolt Installation

Drill through bagwell and frame, then install 10x90mm bolts from pack 1.

Seat and Support Structure Assembly

Seat Frame to Bagwell Brackets

Attach the seat frame to the bagwell brackets using hardware from pack 2.

Seat Back Support and Armrests Attachment

Attach the seat back support and armrests to the seat frame using hardware from pack 2.

Final Seat Components Attachment

Footrest Brackets Installation

Attach footrest bagwell bracket and footrest brackets to footrest and armrest.

Seat Back Brackets to Seat Back

Seat Back to Seat Back Support

Completion of Installation

Seat Bottom and Strap Attachment

Gutters and Canopy Reinstallation