Need help?Do you have a question about the GU DTN 80 and is the answer not in the manual?
Explains warning symbols for potential hazards and important information.
Provides essential notes and guidelines for the proper use of the swing-door drive.
Details specific requirements and notes for fire-rated door applications.
Outlines fundamental safety practices for operating the door system.
Lists legal and country-specific regulations that must be adhered to.
References necessary documents and inspection logs for the door system.
Describes how the control unit functions during operation, including tests and responses.
Details safety features like doorstops and sensors to prevent accidents.
Explains the different types of locks compatible with the drive.
Describes the feature for faster door opening during normal hours.
Details the automatic closing function for fire-rated doors.
Explains the operation sequence for systems with two door leaves.
Defines the OFF operation mode for restricted access and night-time use.
Describes the EXIT mode for allowing egress while restricting ingress.
Details the AUTOMATIC mode for standard daytime operation.
Explains the MANUAL OPERATION mode for manual access and specific user needs.
Describes the OPEN mode for continuous free access.
Explains the standard switch for selecting operation modes.
Details the optional POS-5 switch for mode selection.
Describes optional push-buttons for initiating door opening.
Details the optional external key switch for door operation.
Identifies the push-button for manual release of fire-rated doors.
Explains the function of the RESET push-button for system re-commissioning.
Describes safety responses during automatic door opening.
Details safety responses during automatic door closing.
Explains the door's closing mechanism using its internal spring.
Describes how to manually open the door against its spring force.
Explains manual opening facilitated by spring force compensation.
Provides guidance on operating the door during a power outage.
Outlines steps for acknowledging and resolving system faults.
Introduces procedures for fixing common malfunctions.
Covers mandatory regular inspections and maintenance activities.
Specifies the inspection and maintenance for hold-open systems.
Advises on concluding service contracts with GU.
General| Brand | GU |
|---|---|
| Model | DTN 80 |
| Category | Door Opening System |
| Language | English |
To Next Page
