Guardian Fall Protection 11200 User Manual

Product Name: Internal Shock Lanyard
Instruction Manual
Part #: 11200; 11201; 11202; 11203; 21215; 01295; 01296; 01297; 01298; 11211; 11212;
11213; 11260; 11261
Do not throw away these instructions!
Read and understand these instructions before using equipment!
Introduction 1
Applicable Safety Standards
1
Worker Classifications
1
Safety Information
6
Product Specific Applications
2
Limitations
2-3
Components and Specifications
3-4
Maintenance, Cleaning, and Storage
5
Inspection
5
Installation and Use
4
Inspection Log
5
Labels
7

Guardian Fall Protection 11200 Specifications

General

D-Ring Locations	Back
Model Number	11200
Application	Fall Protection
Standards	ANSI Z359.11, CSA Z259.10
Product Type	Harness

Summary

Applicable Safety Standards

Product Specific Applications

Personal Fall Arrest (PFAS)

Use for PFAS, requires 5,000 lbs structure, max 6' free fall, dorsal D-ring.

Weight Capacity Range

Specifies the weight range for all applications: 130-310 lbs.

Limitations and Hazards

Fall Clearance Requirements

Requires sufficient clearance below anchorage, minimum 3' safety factor.

Swing Fall Hazard Mitigation

Advises minimizing swing fall hazards by working close to anchor point.

Compatibility and Specifications

Connector Roll-out Prevention

Explains roll-out and requires self-closing, self-locking connectors.

Installation and Use Guidelines

Pre-use Checks and Compatibility

Inspect equipment before use and ensure component compatibility.

Anchorage and Attachment

Ensure anchorage strength and correct attachment of lanyard to harness.

Connector Requirements

Application and Positioning

Maintenance, Cleaning, Storage, and Inspection

Inspection Procedures

Perform pre-use inspections and Competent Person inspections every 6 months.

Critical Safety Information

Equipment Handling and Workplace

System Design and Free Fall

Harness, Connector, and Rescue Plan

Equipment Misuse and Suspension Trauma

Product Labels and Warnings

General Warnings and Data