- 9 -
9
9. With either hand,
place two fingers
on the base of the
pedestal. With the
other hand, grip the
serter and pull the
serter upwards.
arrow
Note: The arrow on the side of the
serter aligns with the needle inside
the serter.
WARNING: Never point a loaded serter toward any body part
where insertion is not desired. An accidental button-push may
cause the needle to inject the sensor in an undesired location,
causing minor injury.
10
10. Place the serter on top
of the prepared insertion
site.
11
11. Press and release both
serter buttons at the
same time. Continue to
hold the serter on top
of the insertion site for
five seconds or more to
let the adhesive stick to
the skin.