What to do if my Guardian PLATINUM displays Low pressure prot.?
If your Guardian Heat Pump displays a low pressure prot., it indicates low pressure1 protection. Check the pressure switch and cold circuit.
What to do if my Guardian Heat Pump shows Anti-freezing prot.?
If your Guardian Heat Pump displays anti-freezing prot., it means the water flow is not enough. Check the pipe water flow and whether the water system is jammed or not.
What should I do if my Guardian PLATINUM displays a Flow switch prot.?
If your Guardian Heat Pump shows a flow switch prot., it indicates there is no or little water in the water system. Check if there is water flow to the pool. If there is flow, the flow switch needs changing.
What to do if my Guardian Heat Pump displays High pressure prot.?
If your Guardian Heat Pump shows a high pressure prot., it means the high-pressure switch is broken. Check the pressure switch and cold circuit to resolve this issue.
What to do if my Guardian PLATINUM Heat Pump has a Comp. overcurrent prot.?
If your Guardian Heat Pump displays a Comp. overcurrent prot., this indicates the compressor is overloaded. To resolve this, check whether the system of the compressor is running normally.
Critical safety warnings and precautions before installation and operation.
Technical specifications and performance data for various models.
Physical dimensions and measurements of the unit.
Visual guide illustrating the heat pump's plumbing connections.
Guidelines for selecting the optimal location for unit installation.
Instructions for connecting the heat pump to the pool's plumbing system.
Details on the correct and safe electrical wiring procedures for the unit.
Step-by-step guide for initial startup and operation after installation.
Overview of the heat pump's control panel interface and its functions.
Instructions for turning the unit on/off and switching between operating modes.
How to adjust the target temperature and set the unit's clock.
Procedures for setting and cancelling on/off timers for the unit.
Managing silent mode, keyboard lock, and understanding fault indicators.
Introduction to the Guardian Handy Heat Pump app and its features.
Steps for installing the Wi-Fi module and connecting to the network.
Guides users through creating an account and configuring Wi-Fi settings for the heat pump app.
Managing the connected heat pump device, viewing status, and adjusting settings.
Outlines safety checks, work procedures, and precautions for maintenance tasks.
Details safety checks for electrical devices, component repair, and cabling during maintenance.
Procedures for detecting, removing, and recovering refrigerants safely.
Steps for safely charging the refrigeration system with refrigerant.
Requirements for cable specifications and adherence to local regulations.
A comparison table of refrigerant saturation temperatures for different pressures.
Diagrams and definitions for the wire control interface.
Detailed wiring diagrams for different models of the heat pump.
Explains the terms and conditions of the product warranty.
To Next Page
General