To Next PageTo Next Page
Need help?Do you have a question about the Guardian QuietSource 005336-1 and is the answer not in the manual?
Dangers of high voltages, shock hazards, proper grounding, and avoiding wet conditions or jewelry.
Shuts down the engine if coolant temperature exceeds a safe level.
Prevents overheating by shutting down the engine if coolant level is too low.
Shuts down the engine if oil pressure drops below a critical threshold.
Stops engine cranking if it fails to start within the specified time.
Initiates an automatic shutdown if the engine speed exceeds a safe preset value.
Triggers engine shutdown if the RPM sensor signal is lost.
Protects the control panel wiring and components from overcurrent.
Essential steps to ensure proper readiness before the initial generator start-up.
Requirement and function of a transfer switch to prevent electrical backfeed.
Checks for correct fuel supply, pressure, purging, and leak testing.
Guidance on checking engine oil, gearbox oil, and initial oil changes.
Critical preparation tasks to prevent engine failure during the first start-up.
Ensuring the cooling system is properly filled and checked for leaks before operation.
Instructions for checking and adjusting the engine fan belt tension.
Verifying proper grounding, battery charging, and tight electrical connections.
A checklist for inspecting the generator before its first startup.
General guidance on operating the generator using its control panel.
Procedure for operating the generator with a manual transfer switch.
Steps for starting the engine and transferring load via manual switch.
Process for returning load to utility and shutting down the generator.
General
