69-20-005-02 Mounting Instructions Gravity Table Lamp US.
ASSEMBLY INSTRUCTIONS
for
Gravity Table Lamp
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T +45 69 15 60 60 – order@gubi.com
GUBI.COM
CARE INSTRUCTIONS
Wipe the parts with a dry cloth or a damp cloth soaked in
warm water. Use only soft cloth for wiping and polishing,
never sponges or steel wool. Do not use abrasive household
cleaners. Do not use acidic or alkaline cleaning materials,
glass cleaner or household ammonia.
TROUBLESHOOTING
If lamp does not light, turn off the power. Check the bulb for a broken filament. Replace bulb
if necessary, then turn it on. If the lamp still does not light, please contact customer service at
the local dealer. If the external flexible cable or cord of this lamp is damaged, it must be
replaced by a qualified electrician in order to avoid a hazard.
TEC H NICA L INFO RMATIO N
Light sources:
Small: E26, max. 1x40W incandescent bulb ~ 470 Lumen.
By LED you can improve light output to max. 1530 Lumen (~13-16W).
Large: E26, max. 1x60W incandescent bulb ~ 810 Lumen.
By LED you can improve light output to max. 1530 Lumen (~13-16W).
Only dimmable light bulbs work properly.
Turn power off when changing light bulb. Isolation class II. The lamp is not approved for
outdoor use or use in damp/wet rooms (IP20).
SAF ETY INSTRUCTIONS
SAFETY INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR
PERSONAL INJURY!
WARNING: Lighted bulb gets HOT! Do not touch while on.
CAUTION: Keep lamp away from curtains, bedding linens, and any other flammable
materials. Do not look directly at lighted bulb. Turn off / unplug and allow lamp to cool before
replacing bulb, cleaning or other maintenance. Do not use in the bathroom or
damp places.
CAUTION: TO REDUCE THE RISK OF FIRE, USE ONLY TYPE A BULB, 120V 60Hz AC ONLY.
Do not exceed recommended wattage.
CAUTION! IMPORTANT: LAMP MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN!
To Next Page
Need help?
General