To Next PageTo Next PageWhat to do if my GÜDE Grinder is not working?
If your GÜDE Grinder isn't working when you press the on-off switch, the possible causes are: * No electricity: Check the electricity supply. * Defective on-off switch: Have the on-off switch replaced by an approved after-sales service team.
Why is my GÜDE Grinder not running at full speed and making unusual sounds?
If your GÜDE Grinder is not running at full speed or you hear unusual sounds from the motor, it could be due to the following reasons: * The motor is overheating: Turn off the device and let it cool down for 30 minutes. * The motor is defective: Contact an approved after-sales service provider.
What to do if GÜDE Grinder grinding discs do not turn?
If the grinding discs of your GÜDE Grinder do not turn when the tool is switched on, it is likely due to wear on the rubber drive wheels. To resolve this, increase the contact pressure using the setscrew until the grinding discs start turning again.
General| Power | 200 W |
|---|---|
| Voltage | 230 V |
| No-load speed | 2950 RPM |
| Grinding wheel diameter | 150 mm |
| Bore diameter | 12.7 mm |
| Grinding wheel thickness | 20 mm |
Provides a helpful tip for the starting-up process.
Step-by-step instructions for starting the machine's operation.
Instructions for safely stopping the machine.
Procedure for maintaining the grinding discs.
Instructions for replacing grinding discs.
Highlights potential residual risks even when used correctly.
First-aid procedure and information to provide in case of an accident.
Guidelines for maintaining a safe working environment.
Precautions regarding electrical connections and usage.
Measures for personal protection and safe operation.
Warnings related to the safe use of accessories.
