Gudsen MOZA AirCross 2 User Manual

© 2019 GUDSEN All Rights Reserved.
MOZA AirCross 2 Release Notes
Date
2019/9/16
Firmware
V0.3.5
What’s New?
 Fully optimized algorithm for the stability control.
 Fully optimized parameters algorithm for Auto-Tuning to further improve the motor performance.
 Optimized battery power display under low voltage conditions.
 Added language selection option when power on for the first time.
 Added the prompt box "please manually check and balance the P axis!" before exiting the
balance check function.
 Added the left side calibration function for roll axis when the camra is mounted on the left side.
 The AirCross 2 will not be automatically re-centered when the upright mode is switched to under
slung mode.
 Solved the problem of the AirCross 2’s abnormal rotation in the hand wheel control mode.
NOTES:
1. The right side calibration is only for when roll axis is placed on the right side of the camera while
the left side calibration is only valid when roll axis is placed on left side of the camera;
2. The gimbal will automatically return to the center when the upright mode is switched to under
slung mode in the old firmware version.
Upgrade via computer:
 Turn off the AirCross 2, long press the center button, hold it and press the power button with the
other hand until the prompt ‘Boot Mode’ appears on the screen, then the AirCross 2 can enter
into the firmware upgrade status.
 Connect the AirCross 2 to the computer with a USB Type-C cable (included with the package).
 Go to Gudsen website, AirCross 2 page and download the latest MOZA Master Software, unzip
and double click (may need to give administrator access) the MOZA_Master_1.2.5, after
AirCross 2 appears on screen, click to connect the device (if AirCross 2 doesn’t appear, make

Gudsen MOZA AirCross 2 Specifications

General

Brand	Gudsen
Model	MOZA AirCross 2
Category	Camera Accessories
Language	English

Summary

What's New

Stability Control Algorithm

Fully optimized algorithm for enhanced stability control.

Auto-Tuning Parameters

Optimized parameters for Auto-Tuning to improve motor performance.

Battery Power Display

Optimized display for battery power under low voltage conditions.

Language Selection

Added option for language selection upon first power-on.

Balance Check Prompt

Prompt box for manual P-axis check before exiting balance function.

Left Side Calibration

Function for roll axis calibration when camera is mounted on the left side.

Upright to Slung Mode

AirCross 2 will not auto-re-center when switching from upright to slung mode.

Hand Wheel Control Fix

Solved abnormal rotation issue in hand wheel control mode.

Firmware Upgrade Procedures

Upgrade via Computer

Detailed steps to upgrade firmware using a computer and MOZA Master Software.

Upgrade via MOZA Master App

Instructions for upgrading firmware using the MOZA Master mobile application via Bluetooth.