BEFORE USING THE STOPWATCH, reset the stopwatch hands to the
“60” and “0” positions.
To reset stopwatch hands:
1. PULL Crown to position “B”.
2. PRESS Pusher “A” intermittently until the top eye hand is reset to
“0”.
3. PRESS Pusher “B” intermittently until the minute and second eye
hands reset to “60”.
NOTE: PRESSING and HOLDING either Pusher “A” or “B” will cause
the hands to continue to move until the pusher is released.
Standard stopwatch measurement:
1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “A” to stop timing.
3. PRESS Pusher “B” to reset.
Accumulated elapsed time measurement:
1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “A” to stop timing.
3. PRESS Pusher “A” to restart timing.
4. PRESS Pusher “A” to stop 2nd timing.
5. PRESS Pusher “B” to reset.
Split time measurement:
1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “B” to stop split.
3. PRESS Pusher “B” to begin again.
4. PRESS Pusher “A” to stop.
5. PRESS Pusher “B” to reset.
33 mens
To Next Page
Loading...
