USER INTERFACE AND KEYBOARD FUNCTIONS
A. Welcome View & Screen Features
B. Keypad Functions
- An external keyboard can be attached to the USB
port on the end panel of the Terrameter, however
full operation can be achieved very easily using just
the front panel keypad.
- When using an external keyboard, the following
relationship between external keys and keypad
functions can be used:
F10 = Play/Pause
F11 = OPT
F12 = Power button
ALT = Menu
TAB = Browse
ESC = Clear
ENT = OK
PROJECT AND SETTINGS
A. Create Project & Task
- From the ‘Welcome’ view, use the Browse key to navigate to the
‘Project List’ view (one tab to the right).
- Select < Create New Project >. The ‘Task List’ automatically
displays.
- Select < Create New Task >. A pop-out window will prompt
selections for task settings.
- Use the Up/Down arrow keys to navigate to each option within
the screen and Left/Right arrows to select the spread and
protocol.
- Spread: Select 4x12 (48 electrode system) or 4x16 (64
electrode system).
- Protocol: Choose electrode array.
- Next, input Minimum Electrode Spacing X [m] by highlighting
the option and pressing the OK key. The virtual keyboard will
open. Enter the correct electrode spacing and press the OK key
to exit. (It does not matter what values are in the Y and Z
electrode spacing for these 2D measurements).
- Select < OK > to exit pop-out window and automatically move to
settings.
To Next Page
Loading...